Digital Monster Ver.20th Board Edits: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 6: | Line 6: | ||
* JP3 | * JP3 | ||
* JP4 | * JP4 | ||
=== Debugging === | |||
To enable debugging in the Japanese Digital Monster Ver. 20th you have to solder JP1. | |||
Once debug mode is enabled, you have access to | |||
* Fast-forwarding: Press B + C together. Fast forward speed is x12. | |||
* Digimon picker: After pressing reset. | |||
=== Version combinations === | === Version combinations === | ||
Latest revision as of 00:13, 11 April 2026
Japanese Ver.20th
In order to version swap, there is access to three jumpers that can be manipulated
- JP2
- JP3
- JP4
Debugging
To enable debugging in the Japanese Digital Monster Ver. 20th you have to solder JP1.
Once debug mode is enabled, you have access to
- Fast-forwarding: Press B + C together. Fast forward speed is x12.
- Digimon picker: After pressing reset.
Version combinations
The below chart shows which version you will have with the two specific connections shown. X axis is the first connection active, Y axis is the second. Versions 0,1 and 2 have the Meicoomon Digitama, but are not legitimate versions and will cause issues for connections.
| JP2 | JP3 | JP4 | |
|---|---|---|---|
| JP2 | D | 1 | 0 |
| JP3 | 1 | C | E |
| JP4 | 0 | E | B |