Digital Monster Ver.20th Board Edits

From DigiMeta
Revision as of 00:13, 11 April 2026 by Nacabaro (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Japanese Ver.20th

In order to version swap, there is access to three jumpers that can be manipulated

  • JP2
  • JP3
  • JP4

Debugging

To enable debugging in the Japanese Digital Monster Ver. 20th you have to solder JP1.

Once debug mode is enabled, you have access to

  • Fast-forwarding: Press B + C together. Fast forward speed is x12.
  • Digimon picker: After pressing reset.

Version combinations

The below chart shows which version you will have with the two specific connections shown. X axis is the first connection active, Y axis is the second. Versions 0,1 and 2 have the Meicoomon Digitama, but are not legitimate versions and will cause issues for connections.

Table caption
JP2 JP3 JP4
JP2 D 1 0
JP3 1 C E
JP4 0 E B
Retrieved from "https://wiki.humulos.com/index.php?title=Digital_Monster_Ver.20th_Board_Edits&oldid=180"