Digimon Pendulum Ver.20th Board Edits: Difference between revisions

From DigiMeta
Jump to navigation Jump to search
Nacabaro (talk | contribs)
Bureaucrats, Interface administrators, Administrators
164 edits
Created page with "Pendulum 20th allows for switching versions, which in term lets you unlock the other version digitamas. == Warning == The following warning was extracted from the document linked at the end of this article. Please read it first before continuing. <blockquote> '''The procedures outlined below should be done as carefully as possible. I will not be held responsible if something goes wrong, nor will anyone else involved with discovering this information. Proceed at your..."
 
No edit summary
 
(6 intermediate revisions by 2 users not shown)
Line 1: Line 1:
Pendulum 20th allows for switching versions, which in term lets you unlock the other version digitamas.  
In order to version swap, there is access to two jumpers that can be manipulated. In order to manipulate these jumpers, you can use a silver pen, or solder in these two pads.  


== Warning ==
* JP2
* JP3


The following warning was extracted from the document linked at the end of this article. Please read it first before continuing.
=== Debugging ===


<blockquote>
To enable debugging in the Pendulum ver. 20th you have to solder JP1.
'''The procedures outlined below should be done as carefully as possible. I will not be held responsible if something goes wrong, nor will anyone else involved with discovering this information. Proceed at your own risk.'''


'''To follow this guide you will want to be comfortable with opening small devices and connecting circuits. If this thought scares you, do not proceed. Bandai will not replace your device if you break something, and parts aren’t easy to come by, so BE CAREFUL. If you’ve never opened a Pen20 before, watch this video first. https://youtu.be/0akUj9rSNn0'''
Once debug mode is enabled, you have access to
</blockquote>


You can find more information about this procedure [https://docs.google.com/document/d/1cM4tV4Ra9JsHu5E9cmmoRg8EmAWQJH_6DD99R3Vl_HE here].
* Fast-forwarding: Press B + C together. Fast forward speed is x360.
* Digimon picker: '''DELETES ALL SAVE DATA.''' Can only be accessed by pressing all three buttons while pressing reset.  


[[Category:Pendulum 20th]]
=== Version combinations ===
 
The below chart shows which version you will have with the two specific connections shown. X axis is the first connection active, Y axis is the second.
 
{| class="wikitable"
|+ Table caption
|-
!
! JP2
! JP3
|-
! JP2
| Blue
| Duke
|-
! JP3
| Duke
| Beel
|}
 
[[Category:Modding]] [[Category:Debugging]] [[Category:Pendulum 20th]]

Latest revision as of 00:14, 11 April 2026

In order to version swap, there is access to two jumpers that can be manipulated. In order to manipulate these jumpers, you can use a silver pen, or solder in these two pads.

  • JP2
  • JP3

Debugging

To enable debugging in the Pendulum ver. 20th you have to solder JP1.

Once debug mode is enabled, you have access to

  • Fast-forwarding: Press B + C together. Fast forward speed is x360.
  • Digimon picker: DELETES ALL SAVE DATA. Can only be accessed by pressing all three buttons while pressing reset.

Version combinations

The below chart shows which version you will have with the two specific connections shown. X axis is the first connection active, Y axis is the second.

Table caption
JP2 JP3
JP2 Blue Duke
JP3 Duke Beel
Retrieved from "https://wiki.humulos.com/index.php?title=Digimon_Pendulum_Ver.20th_Board_Edits&oldid=182"