Digimon Pendulum Ver.20th Board Edits
Jump to navigation
Jump to search
In order to version swap, there is access to two jumpers that can be manipulated. In order to manipulate these jumpers, you can use a silver pen, or solder in these two pads.
- JP2
- JP3
Debugging
To enable debugging in the Pendulum ver. 20th you have to solder JP1.
Once debug mode is enabled, you have access to
- Fast-forwarding: Press B + C together. Fast forward speed is x360.
- Digimon picker: DELETES ALL SAVE DATA. Can only be accessed by pressing all three buttons while pressing reset.
Version combinations
The below chart shows which version you will have with the two specific connections shown. X axis is the first connection active, Y axis is the second.
| JP2 | JP3 | |
|---|---|---|
| JP2 | Blue | Duke |
| JP3 | Duke | Beel |