Digimon Pendulum Ver.20th Board Edits

From DigiMeta
Revision as of 00:14, 11 April 2026 by Nacabaro (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

In order to version swap, there is access to two jumpers that can be manipulated. In order to manipulate these jumpers, you can use a silver pen, or solder in these two pads.

  • JP2
  • JP3

Debugging

To enable debugging in the Pendulum ver. 20th you have to solder JP1.

Once debug mode is enabled, you have access to

  • Fast-forwarding: Press B + C together. Fast forward speed is x360.
  • Digimon picker: DELETES ALL SAVE DATA. Can only be accessed by pressing all three buttons while pressing reset.

Version combinations

The below chart shows which version you will have with the two specific connections shown. X axis is the first connection active, Y axis is the second.

Table caption
JP2 JP3
JP2 Blue Duke
JP3 Duke Beel
Retrieved from "https://wiki.humulos.com/index.php?title=Digimon_Pendulum_Ver.20th_Board_Edits&oldid=182"